|
|
 |
|
|
| Wireless & Optoelectronics |
|
|
|
|
|
| GainSpan |
|
|
|
|
|
|
|
| News |
|
|
23.10.2012 - GainSpan Launches Dual-Band Wi-Fi Modules for Interference-Free Connectivity in Challenging Environments  more
19.07.2012 - GainSpan's GS1500M Module Achieves Wi-Fi CERTIFIED Wi-Fi Direct™ Certification more
14.03.2012 - GainSpan Provides Low Power Wi-Fi Connectivity for Embedded Systems Based on Renesas MCUs more
13.12.2011 - GainSpan Provides Access Point Mode on Embedded Wi-Fi Modules more
18.08.2011 - GainSpan Low Power Wi-Fi SoC, Modules, Kits with iPhone App Now Available from Glyn more
|
|
|
| |
|
| Downloads |
|
|
 GainSpan Company Overview
|
|
| |
|
| Low Power Wi-Fi System On Chip |
|
|
|
|
|
 GS1011 Ultra Low Power Wireless Single Chip
Product Overview
The GS1011 device is a highly integrated ultra low power wireless single chip which contains an 802.11b radio, media access controller (MAC) and baseband processor, on-chip flash memory and SRAM, and an applications processor all on a single package. The GS1011 supports the full 802.11b (11Mbps) data rates providing scalability on data throughput for higher bandwidth application while still providing the ultra low power consumption for years of battery life. Along with its embedded software stack it offers a highly scalable, reliable, manageable and secure wireless link to meet the growing demand of wireless sensor networks utilizing the broadly accepted IEEE 802.11b,g,n standards infrastructure. This solution is ideal for use in healthcare, smart energy, building automation, industrial and commercial automation, and consumer applications. In addition, the solution provides capabilities such as location awareness which also make it well suited for logistics and supply chain applications for tracking asset location and status.
Block Diagram
GS1011 Block Diagram
Features
- Highly Integrated wireless SOC with 802.11 radio, MAC and Baseband, Integrated PA, Application CPU, RTC, SRAM and FLASH
- Reduces system cost of implementing separate devices and lowers design complexity
- Ultra small form-factor reduces board space
- Supports IEEE 802.11
- Lowers customer's total cost of ownership (TCO) in network implementation and management
- Seamlessly integrates with existing 802.11b/g infrastructure and utilizes the 802.11 security, manageability, easeof-use, and quality of service
- Supports full 802.11b data rates (up to 11 Mbps) for higher bandwidth applications
- 802.11i/WPA2* Authentication, AES* Hardware encryption
- Enterprise level security & reliability for sensor networks
- Power Management
- Optimized for battery powered application with very low power consumption for multiple years of battery life
- Location Awareness
- Enables users to trace and monitor assets
- Multiple I/O: SPI*, UART, PWM, I2C*, ADC, GPIO
- Provides flexibility in system design for easier integration
- Firmware, Device drivers, Reference Application SW, APIs, and SDK
- Reduces customer development time for application software enabling faster time to market
- Seamless HW upgrade to current designs
- Pin and package compatible with GS1010, makes it drop in replacement onto current GS1010 designs
Specifications
| Feature |
Description |
| Dual-Core Processors |
Two 32-bit ARM7 CPU @44MHz
1 for applications (APP) : 1 dedicated to radio (WLAN) |
| On Board Memory |
RAM 128KBytes , FLASH 384KBytes, ROM 80KBytes |
| Radio (Data Rates) |
802.11 (Wi-Fi) b/g compatible
Rates Supported: 11, 5.5, 2 and 1 Mbps (CCK/QPSK/BPSK Modulation) |
| Security |
802.11i (WPA2 - PSK, WPA, WEP), Authentication, AES Encryption |
| RF Power |
9dbm typical (estimate) |
| Range |
50-70M Indoor, 200-300M+ Outdoor (Typical Estimate) |
| Operating Temp Range |
-40 to +85 °C industrial temp |
| Location Awareness |
RSSI |
| Software Protocol Support |
TCP/IP, UDP, SNMP, RTOS |
| *Standby State with RTC |
1- 5uA depends on voltage on RTC *lowest power state |
| Package |
10 x 10 x 0.85 mm; 102-pin dual row QFN; RoHS compliant
Pin and Package compatible with GS1010 |
| I/Os |
UART (2), I2C, SPI (2), ADC (2), PWM (3), GPIO (32) |
Ordering Details
| Part Number |
Description |
Documentation |
| GS1011SoC |
System on Chip, 102 pin IC device. QFN Package.
Ultra low power Wi-Fi IC device, dual ARM7 core with Flash, SRAM and I/O. RoHS Compliant |
GS1011 Product Brief |
more
|
|
| Low Power Wi-Fi Modules |
|
|
|
GS1500M Low Power Wi-Fi Module Family
Product Overview
 The GS1500M is a fully certified module offering quick, easy and cost effective way for OEMs to enable leading edge Wi-Fi connectivity (802.11b/g/n) in their platforms. The module provides multiple serial UART or SPI interfaces, enabling connection to any embedded design utilizing a 8/16/32-bit microcontroller via simple commands. The GS1500M is an ideal solution for OEMs with no or limited Wi-Fi or RF expertise, as it dramatically reduces development time and eliminates the burden of testing and certification, allowing customers to exclusively focus on their core platform. The module supports Wi-Fi PHY rates up to 72.2 Mbps, is fully compliant with 802.11b/g/n and meets Wi-Fi Alliance and worldwide regulatory requirements. GS1500M also supports the newly available Wi-Fi Direct standard from Wi-Fi Alliance. This enables the module with best-in-class peer to peer networking which allows Wi-Fi devices to connect to one another without an access point, enabling easy transfer of content anytime, anywhere.
Multiple software configurations are available for running a stack or network services on the module. For applications utilizing a small 8 bit microcontroller host, the module supports a serial to Wi-Fi function and runs the full Wi-Fi and TCP/IP networking stacks, completely offloading the host. For applications utilizing more powerful microcontrollers, the networking stack and services can reside on the host while the module provides the IP to Wi-Fi functionality. In addition, it supports WEP/WPA/WPA2 security, Adhoc as well as Wi-Fi Protected Setup (WPS) for ease of provisioning.
The module Part Number is single sided, pin compatible with previous GS1011M module, with castellation on the edges for I/O connection so module can be soldered down on customer application base-board.
GS1500M embedded Wi-Fi IO application
GS1500M embedded Serial/IP to Wi-Fi application
Block Diagram
GS1500 Block Diagram
Benefits
- Brings leading edge Wi-Fi and web connectivity to any platform with a microcontroller and serial HOST interface (UART or SPI)
- Reduces development time while accelerating time to market
- Self contained solution minimizes host processor loading
- Easy device provisioning through ad-hoc or Wi-Fi Protected Set-up (WPS)
- Low power consumption through dynamic power management modes:
Features
- Operates with standard 802.11b/g/n access points at speeds up to 72.2 Mbps
- Infrastructure or Adhoc mode
- Supports peer to peer networking
- Multiple UART and SPI interfaces
- Supports Master and Slave SPI Modes
- Up to 11 Mbps in SPI Master Mode
- Up to 3 Mbps in SPI Slave Mode
- Up to 921.6 kbps on UART
- Full Wi-Fi stack including WPS and optional networking stack and services
- 802.11i Security
- WEP, WPA/WPA2 (AES and TKIP), Enterprise
Module Highlights
- Single power source of 3.3V
- Certified Modules (FCC/IC, Wi-Fi)
- Rich I/O interfaces such as SPI, UART, GPIO, I2C, ADC, JTAG
Specifications
| Feature |
Description |
| Radio Protocol |
Supports IEEE 802.11b, 11g, 11n single stream |
| RF Output Power (Typical) |
14 dBm (Internal PA) |
| RF Operating Frequency |
2.412 - 2.484 GHz |
| Supported Data Rates |
802.11b (CCK): 1, 2, 5.5, 11 Mbps
802.11g (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (1x1 HT20): MCS0-7
|
| Antenna Options |
PCB Trace or u.FL connector for external antenna |
| Operating Temperature |
Industrial (-40°C to +85°C) |
| Security Protocols |
WEP, WPA/WPA2(AES and TKIP), Enterprise(EAP-FAST, EAP-TLS, EAP-TTLS, PEAP) |
| Networking Protocols |
UDP, TCP/IP (IPv4), DHCP, ARP, DNS, SSL, HTTP/HTTPS Client and Server |
| Certifications and Compliance |
Wi-Fi, FCC, IC, Japan, ETSI, RoHS |
| I/O Interface |
UART (2), SPI (2), I2C, ADC (2), WAKE, ALARM (2), GPIOs, PWM, JTAG |
| Dimensions |
Internal PA = 36.8mm x 22.9mm (1.45 in x 0.9 in) |
| Power Source |
3.3V |
| Power Consumption (Typical) |
Deep Sleep = TBD
Receive = TBD
Transmit = TBD (Internal PA) |
Ordering Details
| Part Number |
Power Amplifier |
Antenna Option |
Documentation |
| GS1500M |
Internal PA |
PCB trace or External Antenna (U.FL) |
GS1500M Module Product Brief |
more
|
|
|
|
GS1011M Soldered-On Low Power Wi-Fi Module Family
Product Overview
 The GS1011M family of fully certified modules offers a quick, easy and cost effective way for device and appliances manufacturers to add Wi-Fi capabilities to their products. The module provides a serial UART or SPI interface, enabling connection to any embedded design utilizing a 8/16/32-bit microcontroller via simple commands. The GS1011M is an ideal solution for organizations with limited or no Wi-Fi or RF expertise, as it not only dramatically reduces RF design time but also removes the burden of testing and certification, allowing customers to focus on their core application, product or expertise. The module supports data rates up to 11 Mbps, is compliant with 802.11b and meets regulatory and Wi-Fi Alliance requirements.
Multiple software configurations are available for the stack running on the module. For applications utilizing a small 8 bit microcontroller host, the module supports a serial to Wi-Fi function and runs the full Wi-Fi and TCP/IP networking stacks, completely offloading the host. For applications utilizing more powerful microcontrollers, the networking stack and services can reside on the host while the module provides the IP to Wi-Fi functionality. In addition, it supports WEP/WPA/WPA2 security, Adhoc as well as Wi-Fi Protected Setup (WPS) for ease of provisioning.
GS1011M-based Embedded Design
Block Diagram
GS1011M Block Diagram
Benefits
- Brings Wi-Fi and web connectivity to any device with a microcontroller and serial HOST interface (UART or SPI)
- Reduces development time, testing and certification burden, accelerating time to market
- Fully contained solution minimizes host processor loading when needed
- Easy device provisioning through adhoc or Wi-Fi Protected Set-up (WPS).
- Ultra low power consumption through dynamic power management
Features
- Operates with standard 802.11 b/g/n access points at speed up to 11 Mbps (802.11 b rates)
- Infrastructure or Adhoc mode
- UART and SPI interface
- Up to 5 Mbps data rate (SPI)
- Full Wi-Fi stack including WPS and optional networking stack and services
- 802.11i Security
- Certified modules
Module Highlights
- Single power source of 3.3V
- Regulatory (FCC) and Wi-Fi Certified
- Rich I/O interfaces such as SPI, UART, GPIO, I2C, ADC, JTAG
Ordering Details
- 802.11b Wi-Fi Low Power module optimized for battery-powered applications.
- Modules do not include latest firmware. Customers need to reprogram firmware from the GainSpan Technical Support site
more
|
|
|
|
GS1011MIC Connectorised Low Power Wi-Fi Module Family
Product Overview
 The GS1011M family of fully certified modules offers a quick, easy and cost effective way for device and appliances manufacturers to add Wi-Fi capabilities to their products. As opposed to other GS1011M soldered down modules the GS1011 MIC uses a 30 pin connector. The module provides serial UART connection to any embedded design utilizing an 8/16/32-bit microcontroller via simple commands. The GS1011M family is an ideal solution for organizations with limited or no Wi-Fi or RF expertise, as it not only dramatically reduces RF design time but also removes the burden of testing and certification, allowing customers to focus on their core application, product or expertise. The module supports data rates up to 11 Mbps, is compliant with 802.11b and meets regulatory and Wi-Fi Alliance requirements.
Multiple software configurations are available for the stack running on the module. For applications utilizing a small 8-bit microcontroller host, the module supports a serial to Wi-Fi function and runs the full Wi-Fi and TCP/IP networking stacks, completely offloading the host. The module includes access to ADC pins for connecting sensors for applications that plan to develop a Wi-Fi based sensor device. In addition, it supports WEP/WPA/WPA2 security, Web Server as well as Wi-Fi Protected Setup (WPS) for ease of provisioning.
GS1011MIC CONNECTORIZED Embedded Design
(Internal PA, PCB Trace Antenna)
The module has a 30-pin connector that brings out the I/O connection and includes a PCB trace antenna. The module is US (FCC/IC), Europe (ETSI) and Japan (TELEC) certified.
Benefits
- Brings Wi-Fi and web connectivity to any device with a microcontroller and serial HOST interface (UART)
- Reduces development time, testing and certification burden, accelerating time to market
- Fully contained solution minimizes host processor loading when needed
- Easy device provisioning through Wi-Fi Protected Set-up (WPS) or Web Server
- Ultra low power consumption through dynamic power management
Features
- Operates with standard 802.11 b/g/n access points at speed up to 11 Mbps (802.11b)
- Infrastructure or Adhoc mode
- Supports data rates of up to 921.6 kbps on UART
- Full Wi-Fi stack including WPS and optional networking stack and services
- 802.11i Security
- WEP, WPA, WPA2-PSK, Enterprise
- Certified modules
Module Highlights
- Power source: 3.3V or 1.8V I/O, 3.6V Battery
- Certified Modules: FCC/IC, ETSI, TELEC
- Rich I/O interfaces : UART, GPIO, I2C, ADC, PWM
Ordering Details
- 802.11b Wi-Fi Low Power module optimized for battery-powered applications.
- Modules do not include latest firmware. Customers need to reprogram firmware from the GainSpan Technical Support site
| Part Number |
Power Amplifier |
Antenna Option |
RF Output Power (Typical) |
Documentation |
| GS1011MIC |
Internal PA |
PCB trace antenna |
9dBm |
GS1011MIC Product Brief |
more
|
|
| Serial To Wi-Fi Evaluation Kits and Boards |
|
|
|
Serial to Wi-Fi Evaluation Kits
Product Overview
 The Serial-to-Wi-Fi Evaluation Kit offers a quick and easy way for customers to evaluate the capabilities of GainSpan's GS1011 ultra-low power wireless system-on-a-chip and the Serial-to-Wi-Fi embedded software for Wi-Fi networks. The Serial-to-Wi-Fi embedded software enables faster time-to-market for new or legacy products that need to add Wi-Fi to their designs.
The Serial to Wi-Fi Evaluation Kit provides GainSpan's customers the means to evaluate the capabilities of the GS1011 ultra-low power wireless system-on-a-chip and the Serial to Wi-Fi embedded software for Wi-Fi networks. The Serial to Wi-Fi embedded software allows devices and appliances manufacturers to easily add Wi-Fi capabilities to their products with minor impact on the host microcontroller firmware.
The Serial to Wi-Fi Evaluation Kit provides all the hardware and software necessary to quickly set up a serial (UART) based link to a PC or external microcontroller. In order to evaluate the ease of adding secure Wi-Fi communications to a product using GainSpan's AT command set, the kit includes all the software tools necessary for configuration of Serial-to-Wi-Fi and GS1011 modules, data transfer using "AT" command-set and protocol analyzer for validation of packet & frame fields.
The Serial to Wi-Fi Evaluation Kit enables GainSpan customers to develop software on their existing microcontrollers to support the "AT" command set, and connect it to the serial interface on the evaluation kit reference board.
The evaluation kits ship with serial-to-Wi-Fi binary pre-loaded. Additional binaries are included in the kit to download to the module for evaluating other features and capabilities such as Wi-Fi protected Setup (WPS), Enterprise Security (EAP), RF Testing and Temperature and Light Sensing (TLS).The Serial to Wi-Fi Evaluation Kit provides all the hardware and software necessary to quickly set up a serial (UART) based link to a PC or external microcontroller. In order to evaluate the ease of adding secure Wi-Fi communications to a product using GainSpan's AT command set, the kit includes all the software tools necessary for configuration of Serial-to-Wi-Fi and GS1011 modules, data transfer using "AT" command-set and protocol analyzer for validation of packet & frame fields.
Benefits
- Easy in-field provisioning with WPS or embedded configuration web pages
- Easy integration of Wi-Fi connectivity to devices with existing microcontroller serial interface
- Minimal Serial to Wi-Fi "driver" footprint on host microcontroller and minor changes to existing host MCU firmware
- Offloading of smaller host microcontrollers from the Wi-Fi and TCP/ IP networking
- Simple AT commands for configuration and data communication
- Support for over the air firmware updates on GS1011
Features
- Data Rates:
- Embedded Web server & configuration web pages
- SSL
- TCP/UDP/IP
- TCP/UDP connections
- DNS
- Static IP or DHCP
- 802.11 b/g connection
- Infrastructure or ad hoc modes
- Wi-Fi Security:
- WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
- Power Management Commands
- Temperature and Light Sensor Application
GS1011 Reference Board Specifications
| Feature |
Description |
| Radio Protocol |
IEEE 802.11b |
| Module |
GS1011MIP-EVB, GS1011MEP-EVB, GS1011MEE-DB |
| RF Output Power (Typical) |
9 dBm with GS1011MIP-EVB
18 dBm with GS1011MEP-EVB or GS1011MEE-DB |
| RF Operating Frequency |
2.4 - 2.497 GHz |
| Antenna Type |
PCB Trace Internal Antenna or u.FL connector for external Antenna |
| I/O Port |
6-pin serial UART interface (15540 compatible)
DB9 RS232 Connector |
| Power Source |
Two 1.5 V Lithium Batteries with GS1011MIP-EVB or GS1011MEP-EVB
3.3V DC Power Adapter with GS1011MEE-DB |
Ordering Details
- The Serial to Wi-Fi Evaluation Kit makes it possible to evaluate and test Wi-Fi functionalities and build applications using a serial to Wi-Fi interface. The kit includes hardware and software to quickly setup and test a serial link (UART, RS232) to an external microcontroller. The evaluation kit includes the GS1011M Evaluation Board, 1 wireless access point pre-configured for sensor applications, 2 AA batteries, UART to USB serial Cable, USB memory stick with demonstration/utility software and documentation. The USB memory stick also includes additional binary configurations that can be downloaded to the GS1011M module for evaluating Wi-Fi Protected Setup (WPS), personal and enterprise security, power consumption, RF range, and more.
- In addition to serial to Wi-Fi functionalities, binaries for temperature and light sensing applications are included to demonstrate capabilities to build sensor applications with GainSpan WiFi modules and software. Customers can download the GainSpan iPhone Application from the Apple Store in order to display sensor data.
| Part Number |
Description |
Image |
Documentation |
| GS1011MIP-EVK-S2W-WEB |
GS1011MIP Evaluation Kit includes:
- GS1011MIP-EVB Evaluation Board
- Internal PA
- PCB Antenna
- Serial to Wi-Fi interface application
- Embedded HTTP server with Wi-Fi and IP network configuration pages
- Loadable binary images:
- Serial to Wi-Fi with HTTP server with Wi-Fi and IP network configuration pages - UART
- Serial to Wi-Fi with WPA/2 enterprise - UART
- Serial to Wi-Fi with WPS - UART
- Serial to Wi-Fi with FCC test API
- Temperature Light Sensor (TLS)
- Accessories:
- Wi-Fi Access Point - pre-configured for sensor applications
- USB to TTL Serial Cable - for node provisioning and configuration via PC
- 2 AA Batteries
- USB Key with host MCU device driver source, WireShark, Terra Term, Simple Term, GSDemo and documentation
|
|
Serial to Wi-Fi Evaluation Kit Product Brief |
| GS1011MEP-EVK-S2W-WEB |
GS1011MEP Evaluation Kit includes:
- GS1011MEP-EVB Evaluation Board
- External PA
- PCB Antenna
- Serial to Wi-Fi interface application
- Embedded HTTP server with Wi-Fi and IP network configuration pages
- Loadable binary images:
- Serial to Wi-Fi with HTTP server with Wi-Fi and IP network configuration pages - UART
- Serial to Wi-Fi with WPA/2 enterprise - UART
- Serial to Wi-Fi with WPS - UART
- Serial to Wi-Fi with FCC test API
- Temperature Light Sensor (TLS)
- Accessories:
- Wi-Fi Access Point - pre-configured for sensor applications
- USB to TTL Serial Cable - for node provisioning and configuration via PC
- 2 AA Batteries
- USB Key with host MCU device driver source, WireShark, Terra Term, Simple Term, GSDemo and documentation
|
|
Serial to Wi-Fi Evaluation Kit Product Brief |
| GS1011MEE-EVK-S2W-WEB |
GS1011MEP Evaluation Kit includes:
- GS1011MEE-EVB Evaluation Board
- External PA
- External Antenna via board connector
- Serial to Wi-Fi interface application
- Embedded HTTP server with Wi-Fi and IP network configuration pages
- Loadable binary images:
- Serial to Wi-Fi with HTTP server with Wi-Fi and IP network configuration pages - UART
- Serial to Wi-Fi with WPA/2 enterprise - UART
- Serial to Wi-Fi with WPS - UART
- Serial to Wi-Fi with FCC test API
- Temperature Light Sensor (TLS)
- Accessories:
- Wi-Fi Access Point - pre-configured for sensor applications
- USB to TTL Serial Cable - for node provisioning and configuration via PC
- AC Adapter
- USB Key with host MCU device driver source, WireShark, Terra Term, Simple Term, GSDemo and documentation
|
 |
Serial to Wi-Fi Evaluation Kit Product Brief |
more
|
|
|
|
Serial to Wi-Fi Evaluation Boards
more
|
|
| Wi-Fi Software Development Kit |
|
|
|
Wi-Fi Software Development Kit
Product Overview
 The GainSpan Software Development Kit (SDK) enables firmware engineers to extend middleware software provided by GainSpan or develop embedded applications for the GS1011. Whether the design integrates the GS1011 module with a host microcontroller (MCU) or uses the GS1011 SoC, developers have increased design of and flexibility in firmware running on the GS1011.
This SDK contains a development board with the GS1011MEE module, embedded software (most in source code), configuration management system, firmware update system, networking middleware, RTOS, device drivers, an integrated development environment (IDE) and JTAG hardware. Two SDK options are available: Basic and Professional SDKs.
With the Professional SDK, software development teams have access to source code for the GainSpan embedded software and can design & run highly custom applications for the GS1011 SoC and GS1011 modules. Software engineers can use and modify sample applications as a baseline for new ones. With most of the GEPS software available in source, software engineers can scale-down the binary size as necessary.
With the Basic SDK, software development teams can expand embedded web pages for device specific configuration (GainSpan provides Wi-Fi and IP network configuration pages) and expand the Serial to Wi-Fi interface software for custom APIs. Software engineers can extend basic capabilities of the firmware on the GS1011 Modules.
Development Board
GainSpan development board contains the GS1011MEE ( GS1011MEE Evaluation Boards Product Brief), Wi-Fi subsystem and connectors to integrate with a host MCU board or with board-level components like sensors. It enables engineering teams to start software development against functional HW prior to the availability of custom boards.
Benefits
- Reduced development, testing and certification times, accelerated time to market for embedded application for the GS1011 modules and GS1011 SoC
- Reduces time to production with production board options: GS1011 Modules, Reference designs for custom boards with GS1011 SoC
- Ubiquitous LAN and internet connectivity
- Scalable code-size of embedded software
- Rapid field deployment with provisioning options: WPS and embedded web pages for configuration
- Firmware update mechanism
- Ultra low power consumption through dynamic power management
Features
- Source code and binary: IP to Wi-Fi, Serial to Wi-Fi interface application, Configuration web pages
- Source and binary to GEPS, HTTP server/client, networking middleware and RTOS (Professional SDK only)
- Complete Wi-Fi & networking services software
- 802.11i Security
- WPA/WPA2-Enterprise
- WPA/WPA2-PSK, WPA, WEP
- IDE and JTAG
Documentation
SDK Product Brief
more
|
|
| Wi-Fi iPhone App & Evaluation Kit |
|
|
|
GainSpan Wi-Fi iPhone App
Allows an iPhone or iPod Touch To Work with the GS1011 TLS Kit
 This Application allows an iPhone or iPod Touch to work with the GS1011 TLS Kit from GainSpan. From the iPhone you can view the Temperature, Light, Voltage, or Relative Signal Strength of a particular TLS Node.
The GainSpan nodes populate the configuration page with their MAC IDs. PLEASE NOTE - All nodes must be pre-configured to operate with the iPhone SNMP stack. The TLS hardware has been delivered to your facility and must be used with this application over Wi-Fi.
Nodes connected to the network are populated into the configuration page with their MAC addresses displayed. The application allows the user to select a particular node from the list. Once selected, the tab bar along the bottom displays the sensor light, temperature, battery voltage or relative signal strength information updated periodically from the node. Shine a light on the TLS board and the light bulb will get brighter and display the LUMS value.
The configuration page allows the user to Get/Set different parameters associated with the TLS board – like the Update Value or the SSID.
By selecting a different MAC from the discovered nodes list, the sensor information associated with that particular node will then be displayed.
The GS1011 TLS Kit is also the GS1011MxP Evaluation Kit referred to in the section above with the following part numbers: GS1011MIP-EVK-S2W-WEB and GS1011MEP-EVK-S2W-WEB.
Download the GainSpan App from the iPhone App Store
|
|
|
|
